工控论坛

 找回密码
 注册

QQ登录

只需一步,快速开始

查看: 24|回复: 0

SoftLogix 5800 Version 19.00.00

[复制链接]

54

主题

62

帖子

116

积分

初级会员

Rank: 2

工控币
116
发表于 2019-12-12 16:12:41 | 显示全部楼层 |阅读模式
SoftLogix5800是AB公司推出的软PLC,用电脑充当PLC的CPU。SoftLogix5800也可以用来仿真,和西门子的WINAC,WINLC差不多。

1.png 2.png
System Requirements
        Base Platform Requirements:
                Intel Pentium 4 1.6GHz
                A minimum of 1Gb of RAM
                64 Mb of free hard disk space per controller instance (or more based on application requirements)
                800 X 600 video resolution
                Any Windows-compatible pointing device

        Operating System (32-bit only) :
                Microsoft Windows XP with Service Pack 2 or higher (recommended)
                Microsoft Windows Vista
                Microsoft Windows 7
                Microsoft Windows 2003 Server Standard Edition
                Microsoft Windows 2008 Server Standard Edition

Product Revision Information
        SoftLogix5800 Version 19.00.00 requires the following:

        Software Product Compatible Versions:
                RSLinx 2.57 or higher
                RSLogix5000 Version 19.00.00
                IOLinx for DeviceNet 2.01.29
                RSNetworx for DeviceNet  10.01
                RSNetworx for ControlNet 10.01

        PCI Card Firmware and Driver Versions:
                1784-PM02AE 19.2 firmware and driver version 19.02
                1784-PM16SE 19.1 firmware and driver version 19.01

                Universal PCI cards (Series B)
                1784-PCIC/B, 1784-PCICS/B   4.10  firmware and driver version 4.06
                1784-PCIDS/B                3.016 firmware and driver version 2.01

                5 Volt only PCI cards (Series A)
                1784-PCIC/A, 1784-PCICS/A   3.10   firmware and driver version 4.06
                1784-PCIDS/A                2.008 firmware and driver version 2.01

        IMPORTANT:  Note: This version of the 1784-PM02AE and 1784-PM16SE firmware is only compatible with                                      SoftLogix5800 Version V19.00.00 and greater

Installation Procedure
        Product Installation:
                Begin the installation of the product by running the install.exe file
                located at the root of the CD media. This will launch a CD browser that
                provides a means to install the SoftLogix5800 product, and
                also displays pertinent product information.

                Please use the "Add/Remove Programs" applet in control panel to remove
                previous versions of SoftLogix5800.  While performing an install or uninstall,
                please note any messages that recommend a system reboot.  Failure to follow
                the reboot instructions can render your installation inoperable.

                Please refer to the SoftLogix5800 Installation Instructions for details on
                installing this product.  This document can be viewed with the Adobe Acrobat
                Reader by opening the file 1789-IN001F-EN-P.pdf located at
                <CD-drive letter>\Documentation on the SoftLogix5800 CD.

                The SoftLogix5800 System User Manual can be viewed with the
                Adobe Acrobat Reader by opening the file 1789-UM002F-EN-P.pdf
                located at <CD-drive letter>\Documentation on the SoftLogix5800 CD.

               IMPORTANT NOTES:
                   SoftLogix5800 cannot be installed on any machine that already has
                   an installation of RSLogix Emulate 5000.

                   RSLinx should be installed prior to the SoftLogix5800 product. After
                   the products are installed, you must first add the Virtual Backplane driver
                   in RSLinx in order to connect to the SoftLogix engine.

                   Even if you plan to remotely program the controller over a ControlNet or
                   Ethernet link, you must add the Virtual Backplane driver via RSLinx software.
                   If you do not, persistent storage will not function and when you reboot the
                   computer, the controller will come up with cleared memory (the program will
                   not get re-loaded).
下载:百度网盘:https://pan.baidu.com/s/1HxLvxnp5G9D3GBuQ3AtWcg 提取码: bwdd
城通网盘:https://tc5.us/file/7925742-413410707

解压密码.txt (702 Bytes, 售价: 50 工控币)
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

免责声明: 工控技术网(www.eleok.com)所有内容均为网友自行发布,不代表网站立场。如有版权纠纷,请联系本站删除:1370723259@qq.com

QQ|小黑屋|手机版|工控技术网 |网站地图

GMT+8, 2020-10-30 12:32

Powered by Discuz! X3.4

Copyright © 2001-2020, Tencent Cloud.

快速回复 返回顶部 返回列表