安装文件下载：仅提供个人在家学习用途，具体系统兼容性和安装方法请自行查阅资料，此程序文件来源于网络可靠性稳定性完整性皆无法验证，禁止用于其他用途，后果自负。
https://pan.baidu.com/s/13xRB8nHfDa5iFBXE4gpBrw
请先确认以上网盘链接有效再下载提取码附件，避免浪费积分，若链接失效请回帖反馈以便及时处理并留下邮箱给您发送可用链接。
百度网盘提取码及解压密码.txt
(1.44 KB, 售价: 5 E币)
What’s New in Cscape™ 9.90
Cscape 9.90 SP14 Enhancements
Added the following support to MQTT –
• Metric Count and Topic Count updated for Sparkplug
• Auto Reconnect flag and Reconnect Interval added for Broker configurations
• Copy and Paste Metrics feature added for Topic Configurations
• Reconnect Interval and Keep Alive times are in sync if the user does not want to auto-reconnect.
• Sparkplug publish topics are not copied into the subscribe topic list
• Firmware checks added
• Copy-paste will now permit 128 variables instead of 127
• Sparkplug broker now has 3 default subscribe topics
Added support for updated Canvas 7D and XL7 Prime being released soon.
Cscape 9.90 SP12 Enhancements
Added support of ASCII over TCP/IP client protocol (Impacted Products: Micro OCS Series (X4/ X7/ X10))
Added 1023 objects per screen support for models (Impacted Products: XL10 Prime and EXL10)
Added support for ADC270 OCS-I/O module (Impacted Product:HE959ADC270)
Cscape 9.90 SP11 Enhancements
Added BACNet MSTP downloadable protocol and licensing support to the Micro OCS Series (X4/X7/X10). NOTE: This requires FW Ver – 15.78 onward
Added XL15 Prime model support. NOTE: This requires FW Ver – 16.32 onward
Cscape 9.90 SP10 Enhancements
Added OCSIO new modules – CNX100
NOTE: This requires FW Ver –
• XL Prime – 16.30 onwards
• XLe/XLt/XLEe/XLTe – 15.62 and 17.02 onwards
• IMX28 – 15.64 onwards
Cscape 9.90 SP9 Enhancements
Added support to XLT/XLTe Gen 3 models.
Added Hardware Revision drop down for XLT/XLTe models in Firmware Update Wizard which is required to load boot files to the units and PGM utility. (9817)
Increased PID blocks support from 4 to 8 for Micro OCS series.
Added new System Registers for storing PGM password (%SR104 and %SR106) to avoid opening of password dialog when PGM is loaded via SR bits.
%SR104 – 32bit %SR for storing password of program which is currently running
%SR106 – 32bit %SR for storing password of program which is being loaded
Implemented OCS I/O dynamic configuration for XL Prime (FW16.20 or higher), XL & X5 series (FW 15.62 or higher)
Upgraded CTRTU dll Ver to 4.50.
BacNetIP support with licensing has been added for Micro OCS series (X4, X7, X10) and XLEe/XLTe devices. Requires FW15.62 or higher.
Added support for color-coded icons based on the datatype of the variable in the Variable Selection tree.
Added edit button which gives user the ability to edit a particular variable directly from the Variable Selection window.
Added new icon to display filtered / unfiltered data inside Variable Selection dialog.
Cscape 9.90 SP8 Enhancements
Addition of OCS-I/O models. Requires FW 15.60 onwards for XL OCS series, Micro Series. Requires FW 16.20 onwards for XL Prime series.
Enabled LAN2 Port for XL7 Prime and XL10 Prime models. Requires FW 16.10 onwards.
New model X5 Prime has been added. Requires FW 16.14 onwards.
Added Tall Fonts (.fnt) to Cscape “Fonts” folder so that a lot of products could really benefit from larger fonts, Micro OCS in particular – especially for numbers.
Added following .fnt files to “Fonts” folder of Cscape installation package: Tall_Narrow_50.fnt; Tall_Narrow_100.fnt; Tall_Narrow_150.fnt; Tall_Narrow_200.fnt; Tall_Numbers_200.fnt
Cscape 9.90 SP7 Enhancements
Addition of new XL Prime OCS series models
Added Additional Cscape Statistics
Added register selector support for client ID (MAC ID) in MQTT configuration. (7143)
Cscape 9.90 SP6 Enhancements
Added BACnet MSTP DLL v4.05 (supports 32bit and Enhanced IEC).
Added CANOpen support for Micro OCS Series (X4/X7/X10) – This is a licensed feature for the Micro OCS Series (X4/X7/X10) and requires FW version 15.60 or above.
Cscape 9.90 SP5 Enhancements
Added text in Terms and Condition page for login event: Event Type, Windows Version, Keyboard Language, Cscape Version, Cscape Language, Toolbars shown, and Cscape Exited Correctly onPrevious Exit.
Cscape 9.90 SP4 Enhancements
Migration Tool – Added an option wherein user can convert Register Based Advanced Ladder program to a Variable Based Advanced Ladder program.
New Cscape programming language – Enhanced IEC available for X5, XL4,
EXL6, EXLW, XL7, XL+, RCC972, RCC1410, RCC2414 & RCC8842. (Licensed
feature requires Firmware 15.50 onwards)
Enabled Cscape Registration
Added Variables/Registers support to EGD Exchange configuration (For
user to switch from IP address to register field, the user will have to clear the
0.0.0.0 present in the IP field and enter the register address)
Cscape 9.90 SP3.5 Enhancements
Added support for Micro OCS series model – X10
Added support for MCS series model – MCS8842
Cscape 9.90 SP3 Enhancements
Increase in objects per screen for X4 and X7 to 100
Cscape Registration
Gmail support in XLEe, XLTe, X4, X7
DHCP and DNS support
UDFB support
MQTT – Sparkplug (Licensed Feature)
AES Encryption for download of security table.
Advanced ladder with tags supporting 50K registers
Structure support in RM blocks
Added Timer / Counter and PID predefined structure for Advanced Ladder with Tags
Cscape 9.90 SP2 Enhancements
Added EXLW(EXL6 wide model)
Updated live graphics update support for XL+ for firmware 15.32 compatibility
Cscape 9.90 SP1 Enhancements
Added X7 model
Added Wifi Support (Currently XL+ only)
Added Support for J1939 and CANopen on RCC Models, RCC2414, RCC8842, RCC1410
Support for full memory map (50000 %R registers etc.) plus logic size increase on RCC Models, RCC2414, RCC8842, RCC1410
Added Set CAN ID Logic Block (Advanced Ladder only – no IEC support)
Needle Only (previously Classic Style) gauge now supports Triangle and Rhombus needle styles as in the advanced gauge style.
Improvements have been made to the interface for selecting images
Improved provision for automatic and manual text wrapping for buttons is available
Added X5 Video Object Support
Support Selection of J1939 Baud Rate
Added HSC digital filtering
Added Xle/t HSC Output Pulse Mode
Added allowing the user to import a set of variable names from an XML file.
Enhanced indirect move block to make it’s use more flexible with Tag based ladder programming.
Remove Obsolete models from Model Database (Products removed: OCS100/110; OCS200/210; OCS250; RCS; All Mini OCS; PLC188; CCU; NJN100; SX117/118; HE-ATBxxx; HE400DNT188; HE200UCNx14)
Cscape 9.80 SP2 Enhancements
Font Migration for QX to XL+
Added Touch Pressure SR registers (%SR9 and %SR10)
24-bit color bmp support added for XL+
“JPEG Compress” option disabled for 24-bit color bitmaps
Font files (.ttf) are saved as part of Cscape Program (.csp) files for XL+
Added more sizes and resolutions to XL+ Video Object
Change in Error Message for more than 100% bitmap size
New model X2 support
Enhanced PWM implementation with Backward compatibility
Cscape Version 9.80 Enhancements
XL+ Support
XLEe/XLTe support
PGM Converter Utility for original XLE/T PGM files
Web Authentication mode selection -‐ to support Socomea/Ewon type virtual connection devices
Support NTP Protocol
Cscape Version 9.70 SP2 Enhancements
Support WebMI 2. Support RCC8842 3. Support Ethernet IP Tag Exchange
Support X5 CAN protocol variants
CANopen.
J1939.
DeviceNet
Add WebMI support on ZX and RCC Platform
Add status for logged in Users (Locally and WebMI)
Increase WebMI alarm count on ZX and EXL10
Support UTC
Cscape Version 9.70 SP1 Enhancements
Support WebMI 2. Support RCC8842 3. Support Ethernet IP Tag Exchange
Support for two new modems
HE-XRC2Q: GSM / GPRS (2.5G) Quad band Modem
HE-XRC3D: UMTS / HSPA 3G Global Modem
Support for 50 K Baud – All Linux Models (XL7e / XL4e / ZX / EXL10e / EXL6e / X5) supports 50 K Baud Rate
Support for X5 controller
【必读】版权免责声明
1、本主题所有言论和内容纯属会员个人意见，与本论坛立场无关。2、本站对所发内容真实性、客观性、可用性不做任何保证也不负任何责任，网友之间仅出于学习目的进行交流。3、对提供的数字内容不拥有任何权利，其版权归原著者拥有。请勿将该数字内容进行商业交易、转载等行为，该内容只为学习所提供，使用后发生的一切问题与本站无关。 4、本网站不保证本站提供的下载资源的准确性、安全性和完整性;同时本网站也不承担用户因使用这些下载资源对自己和他人造成任何形式的损失或伤害。 5、本网站所有软件和资料均为网友推荐收集整理而来，仅供学习用途使用，请务必下载后两小时内删除，禁止商用。6、如有侵犯你版权的，请及时联系我们（电子邮箱1370723259@qq.com）指出，本站将立即改正。
|
|
